PLEASE NOTE:

The following guide is a suggestion only, it is not intended as a recommendation. Your application may be different. Suggestions are provided by FK Bearings.

While this rod end guide applies primarily to motorsport applications, there are, of course, many industrial applications for the same rod ends and bearings. Please feel free to contact us if you need some guidance in determining if a part will work for your application.

The user accepts full responsibility for part determination. AED and FK cannot determine applications for its products. For further assistance in part selection, please contact AED, and we will make every effort to guide you in making the correct selection for your application. 

For more information, see: 3 Rules in Racing and Application Charts

Also, check out our Rod End Seals!

 
FK Rod Ends & Bearings offers six grades of bearing products
for racing applications:

General Purpose — 2-piece style CM / CF; also available 2-pc Chrome Moly CMX

The ball rides on a formed portion of the mild steel body. Fairly high misalignment capability and good strength/cost ratio. Popular for linkage.

General Purpose — 3-piece style JM / JF

Three-piece style features a heat-treated race for the ball to ride on. Less misalignment capability than the CM / CF series. Similar in strength to the CM / CF series.

Specialty Racing Aluminum — 3-piece style ALJM / ALRSM

Made from 7075-T6 Aluminum, the ball rides on a heat-treated race; excellent for sprints and midgets, designed to save chassis in the event of a crash.

High Strength Chrome Moly or 17-4 PH Stainless Steel — 3-piece style JMX / JFX / PMX / SJM

These styles are very strong due to the use of heat-treated alloy steel, 52100 bearing steel ball. Rides on a hardened race for long life.

General Purpose Oversize Body — 3-piece style RSM

Oversize body gives extra strength; mild steel material allows a low cost part. The ball rides on a heat-treated race for longer life.

High Strength Chrome Moly or 17-4 PH Stainless Steel Oversize Body — 3-piece style RSMX / SRSM

Strongest parts available due to the use of a body that is one size larger than the bore. Material is heat-treated 4130 Chrome Moly, 52100 bearing steel ball rides on a heat-treated alloy race for long life.

All of the rod ends above feature a 52100 bearing steel ball that is precision-ground and hard-chrome plated.

If desired, all FK Bearing rod ends may be lined with aircraft-grade TEFLON between the ball and the race for a tighter initial fit and longer life due to the self-lubricating properties of the Teflon material. Some of the rod ends come standard with this liner (designated with the suffix "T") — please consult the catalog or our web-site for final determination.

For more information, see: 3 Rules in Racing and Application Charts